Blue Giant BG2-144
Utilizing many of the same reliable components as the BG1, the BG2-126/144 comes in two configurations. The BG2-126 can elevate an operator to 132″ and attain fork elevations of 126″. The BG2-144 can elevate an operator to 150″ and attain fork elevations of 144″. The BG2-126/144 requires a tether and harness to be worn and comes with both an overhead guard and pallet clamp. Both BG2 vehicles offer travel speeds up to 4.5 mph at ground level with speed reduction based on elevation to slow speed at maximum height.
BG2-126/144 vehicles can be used to effectively order pick from mid-level locations and improve access to pick faces close to the floor. Travel is provided by a high efficiency AC drive motor on each unit that can be programmed through the onboard LCD dash. Power comes from a 340AH industrial battery.
CAPACITY
• 2,000 lb (907 kg) at 24″ LC on forks
• 300 lb (136 kg) operator’s compartment
STANDARD FEATURES
• 42″ forks with pallet clamp
• Anchor, operator harness & tether
• Overhead guard
• Non-marking tires
• Rear flashing light
• Battery compartment rollers
• Low 9″ step height compartment
AVAILABLE OPTIONS
• 12-volt accessory power supply
• 24-volt industrial battery
• 24-volt external charger
BATTERY INFORMATION
• Minimum battery weight: 700 lb (318 kg)
• Compartment dimensions: 32″ x 11″ x Open
• Connector: Anderson 175 Grey – A-11
ELECTRICAL
• Dual 24-volt ZAPI ACO travel and power steering controllers
• LCD dashboard displays hour meter, battery state, travel speed, and travel direction indicator
• AC drive motor
• Low-maintenance brushless design
• Selectable travel speed settings
BRAKES
• Regenerative braking when coasting and plug braking
• Electromagnetic parking brake
OPERATION / CONTROLS
• Ergonomic fingertip control for travel, lift, and lower functions
• Roomy operator compartment
• Retractable compartment guard rails keep the operator secure
• On/off key switch and horn
MAST
• Heavy-duty I-beam design
• Steel mast channels and side mounted lift cylinders
CHASSIS
• Three-point chassis design
• 180° drive motor steering arc
• Powerhead mounted stability casters mounted on powerhead
STANDARD EQUIPMENT
• Non-marking tires
• Rear flashing light
• Battery compartment rollers
• 42″ forks with pallet clamp
• Overhead guard
OPTIONAL EQUIPMENT
• 12-volt accessory power supply
• 24-volt industrial battery
• 24-volt external charger
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Battery – Connector: Anderson 175 Grey – A-11
Tires / Wheels – Load Wheels: (2) 6.5″ x 4.7″ polyurethane
Capacity – Operator’s Compartment: 300 lb (136 kg)
Tires / Wheels – Stability: (2) 3″ x 2″ polyurethane
Lift – Maximum Lift Height: 132″ operator platform, 126″ forks
Battery – Minimum Battery Weight: 700 lb (318 kg)
Specifications – Mast: Two Stage
Maximum Speed – Travel: Variable from 0 mph to 4.5 mph
Specifications – Lift Height: 144″ (3,658 mm)
Tires / Wheels – Drive: (1) 9″ x 3″ polyurethane
Maximum Speed – Lift: Up to 42 fpm
Battery – Compartment Dimensions: 32″ x 11″ x Open
Specifications – Collapsed Height: 94″ (2,388 mm)
Specifications – Extended Height: 230″ (5,842 mm)
Specifications – Overall Length: 108.0″ (2,743 mm)
Specifications – Overall Width: 34.0″ (864 mm)
Lift – :
Specifications – Model: BG2-144
Capacity – At 24″ LC on Forks: 2,000 lb (907 kg)
Specifications – Weight (Chassis Only): 3,800 lb (1,724 kg)
